Get a Quote

Odin Grass

Be the first to rate
Documented product7

Odin Grass is a football turf made from 12,000 dtex spine-profile PE monofilament, six filaments per tuft, 1.4 mm wide. We recommend 40–60 mm piles for football, rugby and American football, in lime or dark green, mixed or zebra.

Pile height for football
40–60 mm
Spine yarn, 6 filaments
12,000 dtex
Fibre width
1.4 mm
Lime, dark, mixed, zebra
4 colourways
Football, rugby, American football
3 sports
Made in our Türkiye facility
Dilovası

Where is it used?

Where Odin is laid

Recommended pile heights for contact sports on artificial turf.

  • Football pitches

    Full-size and small-sided pitches.

    40–60 mm

  • Rugby pitches

    Training and community rugby.

    40–60 mm

  • American football fields

    Training and school fields.

    40–60 mm
3D cross-section of Odin Grass: spine yarn, infill and backing

What is included?

Inside the turf

The render shows the layers. Infill is specified for each pitch.

  1. Spine-profile yarn

    12,000 dtex PE monofilament, six filaments per tuft, 1.4 mm wide.

  2. Infill

    SBR rubber or eco infill over sand, specified per project.

  3. Tufted backing

    The backing that holds the tufts in rows.

Tested and certified

All documents

Product description

A spine-yarn football turf for everyday pitches

Odin Grass is tufted at our Dilovası facility from spine-profile PE monofilament. Each tuft carries six filaments with a combined 12,000 dtex, and each filament is 1.4 mm wide. The spine is the raised rib along the fibre that helps it stand back up after play.

We produce Odin in pile heights from 20 to 65 mm and recommend 40–60 mm for football, rugby and American football. It comes in lime green or dark green; mixed colours and a zebra (striped) pattern are made to order.

Odin or Pro Odin?

Odin and Pro Odin Grass share the same yarn. Pro Odin is the 55–60 mm, mixed-green version that is listed by FIFA after FIFA Quality laboratory testing. Odin itself is not on FIFA's register, so choose Pro Odin or Leon Grass if the pitch needs a FIFA Quality certificate.

Infill

Odin is filled with SBR rubber or an eco infill over sand. Infill type and quantity depend on the pile height and the use of the pitch, so we set them in the quote.

Product details

Technical Specifications

Pile height
20–65 mm; 40–60 mm recommended for football
Yarn
PE monofilament, spine profile, 1.4 mm wide
Yarn decitex
12,000 dtex, 6 filaments per tuft
Colour
Lime green or dark green; mixed or zebra on request
Infill
SBR rubber or eco infill over sand, set per project
Use
Football, rugby, American football
Manufactured in
Dilovası, Kocaeli, Türkiye

Documents and test reports

  • Certificate

    TSE Certificate of Conformity — TS EN 15330-1 (football turf)

    Synthetic turf surfaces for football, Type 6 (without shock pad), manufactured at the Dilovası branch under the registered mark "ekipgrass".

    Issued by
    TSE İstanbul Belgelendirme
    Method / standard
    TS EN 15330-1
    Document no.
    041895-TSE-08/02
    Verification
    Verify with issuer
    Issued
    4 July 2019
    Validity
    Until 12 January 2027
    View on the certificates page

Company certificates — valid for all our products

Get a Quote

Tell us the pitch size, location and timing. We will reply with a system proposal, a quote and, on request, the laboratory test report.

Your details are only used to respond to this request.

Reviews

There are no reviews for this product yet — be the first to write one.

Write a Review
Your rating:

Your review will be published after moderation.

Pro Odin Grass

Pro Odin Grass
Hera Grass

Hera Grass
Non-Infill Grass

Non-Infill Grass
Cibido Grass

Cibido Grass

Cookie preferences

Choose which cookies you allow. You can change your decision at any time with the "Cookie preferences" link at the bottom of the page.

NecessarySession, form security, cart and remembering this choice. Cannot be turned off.
MarketingCookies used to measure ads and show you relevant ads.
WhatsApp